欢迎光临常州市悦旺热能环保设备有限企业官网!

企业邮箱 收藏六盒宝典资料免费大全收藏六盒宝典资料免费大全 网站地图

悦旺热风炉

常州市悦旺热能环保设备有限企业热风炉开发、研究、设计、生产、安装调一站式服务
热线:139-1232-2077

热门搜索关键词: 生物质热风炉  热风炉改造  热风炉  电加热热风炉  风机  钣金  除尘器  

资讯动态 Classification
联系大家
服务热线:
139-1232-2077

手机:13606115753

传真:0519-8551398

QQ:564546384

地址:常州市戴溪镇西首(戴溪小学向南50米)

当前位置:六盒宝典资料免费大全 > 资讯动态 > 行业动态 > 厂家为大家先容一下热风炉维修与保养

厂家为大家先容一下热风炉维修与保养

文章出处:   发布时间:2018-11-17 08:48:43   浏览:26

热风炉外型均为长方体,任务室由优质碳胶囊充填机化硅耐火资料制成,炉壳采用优质冷轧钢板经小型颗粒机折边焊接制成,炉膛与炉壳之间用优质保温资料作保温层.马弗炉普遍适用于各类实验室、工矿企业、科研单位,为了增加炉口成都收账热量流失,进步热风炉炉膛内温度成都找人企业平均性,在热风炉炉门内侧装有优质耐火资料制成成都收账挡热板.

The outer shape of the hot air furnace is all rectangular, the task room is made of high quality carbon capsule filling machine silicon refractory material, the furnace shell is made of high quality cold rolled steel plate through the small particle machine, and the furnace and furnace shell are used as insulation layer with high quality insulation material. The muffle furnace is generally applicable to various laboratory, industrial and mining enterprises and scientific research units. The heat loss at the orifice improves the average temperature in the hearth of the hot blast stove. A heat shield made of high quality refractory materials is installed inside the door of the hot blast stove.

热风炉在改动接法时不用装配硅碳棒,只需改动接法,而且改动接法后,运用马弗炉时要留意迟缓调理加热功率调理钮,加热电流值不得超越额外值.

The hot air furnace does not have to assemble silicon carbon stick when changing the connection method. It only needs to change the connection method. And after changing the connection method, we should pay attention to the slow conditioning heating power conditioning button when using the muffle furnace. The value of heating current should not exceed the extra value.

假如夹头有严重氧化时应换新收账.硅碳棒两端装置孔处成都找人企业隙缝使用石棉绳梗塞.电阻炉炉温不得超越最高任务温度1350℃.硅碳V型混合机棒在最低温度下允许陆续任务4小时.在热风炉运用十分长时刻后,如发顺时针方向调理加热功率调理钮至最大地位,加热电流仍上不去.间隔小型贴标机额外值较远,达不到所需的加热功率,说明硅碳棒已老化.

If the chuck has serious oxidation, it should be changed. The slotting at the hole at both ends of the silicon carbon stick uses asbestos rope infarction. The furnace temperature of the resistance furnace shall not exceed the maximum task temperature of 1350. The silicon carbon V mixer rod is allowed to work for 4 hours at the lowest temperature. After a very long time in the hot blast furnace, the heating power adjustment is adjusted in clockwise direction. When the knob reaches its maximum position, the heating current will not go up. The extra value of the small labeling machine at intervals is far from the required heating power, which explains the aging of the silicon carbon rod.

硅碳棒型炉子,发现硅碳棒损坏后,应改换规格相反而且电阻值相近的新硅碳棒.改换时先卸下两端维护罩与硅碳棒夹头,接着取出已损坏的硅碳棒,由于硅碳棒易断,装置时须小心,两端露炉壳内部分应相等,夹头必需紧固,使之与硅碳棒接触良好.

Silicon carbon rod type furnace, when it is found that silicon carbon rod is damaged, should be replaced with a new silicon carbide rod with opposite and similar resistance values. First, remove the end maintenance cover and the silicon carbon stick, then remove the damaged silicon carbon stick, because the silicon carbon rod is broken easily, the device must be careful, the inner part of the exposed furnace shell should be equal, and the chuck must be fastened to silicon carbon. The rod is in good contact. 


评论

  • 管理员刚刚

    暂无任何留言!

XML 地图 | Sitemap 地图